Do laptop stands help with cooling?

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure

Stands that fit this guide

Short answer: a stand lifts the laptop off the desk so air can reach the bottom, and makers of open and aluminum stands say that helps airflow. Only a fan pad moves air actively. None of the makers here publishes a temperature result, a before-and-after test, or a limit on how hot the laptop may get on the stand, so treat cooling as a side effect they describe, not a figure we can compare.

Close-up: a front lip or grip holding the laptop's front edge, and air flowing under an open frame and through a fan pad front lip / grip: the laptop's frontedge must fit under it air under an open frame or fan grille

What makers claim

The first table is the wording we can attribute to a maker (or, for fans, the fan specification the maker publishes). If a cell says "not published," the brand's product page does not discuss air, heat, or fans.

Cooling and airflow claims on the maker's page
ModelWhat the maker says about air or heat
Rain Design mStandtilted design, aluminum acts as heat sink (maker)
Rain Design iLevel2tilted design, aluminum base acts as heat sink (maker)
Roost V3not published
BESIGN LS03open design (maker)
MOFT Invisible Stand (Large)ventilation cutouts (maker)
havit HV-F20563 x 110 mm, about 1,100 rpm, 65 CFM, USB powered, extra USB port
VIVO STAND-V001L Laptop Tray Desk Mountnot published
VIVO STAND-SIT1L Sit-to-Stand Wall Mountnot published

Rain Design says two related things about the mStand and the iLevel2: the tilted design improves the notebook's airflow, and the aluminum "acts as a heat sink." BESIGN describes an open design. MOFT lists ventilation cutouts. The havit HV-F2056 is the only model with fans: three 110 mm fans, about 1,100 rpm, 65 CFM, USB powered, plus an extra USB port. Roost and VIVO do not publish an airflow or cooling claim on the pages we cite.

What makers do not claim

Figures no maker on this site publishes
FigureStatus on the maker pages we citeWhy it matters
Laptop temperature drop, in °F or °CNot published by any maker here, including the fan padWe cannot rank stands by how many degrees they cool a laptop
Before-and-after or lab test of surface or exhaust temperatureNot publishedA heat-sink or open-frame claim is a mechanism, not a measured result
Safe operating temperature, or a limit on laptop heat while on the standNot publishedThe stand does not replace the laptop maker's own thermal limits
Fan noise, in dBNot published for the havit padWe can report rpm and CFM, not how loud the pad is
Airflow of an open or aluminum stand, in CFMOnly the havit pad publishes CFM (65)Open frames and cutouts are not given a flow number

That gap is why this page does not say a stand "cools your laptop by X degrees" and why the mistakes list includes expecting a stand to cool a hot machine. The havit's 65 CFM is the pad's fan rating, not a measurement of the laptop's own exhaust. Rain Design's heat-sink wording describes the aluminum; it is not a temperature delta. If your laptop maker's manual says to keep vents clear, that manual remains the authority on that machine. A stand can make the underside easier to reach with room air; it does not change the laptop's fan curve or its published thermal design.

When a fan pad is the type that matches the question

If the reason you are shopping is heat, the only active option we list is on the stands with a fan page. A fan pad is also a low stand: the havit offers two incline settings and does not publish a lift in inches, so it will not put the top of the screen at eye level for most adults at a 29 in desk. The trade-off between a lifting stand and a pad is set out in laptop stand vs cooling pad. Heavy 17 in and 17.3 in gaming laptops have a further constraint — which stands publish 17 or 17.3 in support, and at what load, is on the 17-inch and gaming page.

A lifting stand can still be the right tool when the main problem is neck angle, not heat. In that case, treat any airflow wording as a side description, check the inches in the height calculator, and use a separate keyboard if the lift is more than a slight tilt. Materials that makers tie to heat — aluminum as a heat sink, composite cutouts — are compared in aluminum vs plastic vs wood. Whatever you choose, keep the laptop's own vents unobstructed; the stand should not cover an intake the maker put on the bottom or the back edge.

Specs verified: November 2026 · Updated 2026-11-18 · How we research